Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

help with pinpointing rich running problem witha 1988 volvo 740 B230F 700 1988

posted by  Sammy29926 on  Thu Oct 20 15:34 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

hi fellow Brickboarders,
I own a 1988 volvo 740 gle with B230F. It has been running rich and today after purchasing a digital volt meter i decided to check my O2 sensor. I got a reading of 0.826-0.824 volts.. i decided to disconnect the idle valve hose from the intake tube (one with the largest diameter) and my car continue running/idling.. It used to stop when i do that. So my o2 sensor tellin ecu that car is running rich. i decided to check the ETC sensor but i couldn't locate the ecu terminals 13 and 5.. and there is no way i coul read any kind of voltage when the connector is connected to ecu.. Cloud you please tel me how to number the terminals and how to full the ecu conector to read the voltage at terminal 13.
Thank you and your help
Sammy29926






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New help with pinpointing rich running problem witha 1988 volvo 740 B230F [700][1988]
posted by  Sammy29926  on Thu Oct 20 15:34 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.