Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front spindle replacement 200

posted by  stoney on  Sat Nov 5 08:52 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 17:48 CST 2014
[RELATED]

Friend at work has a post 83 245 wagon with a toasted front spindle. Wheel bearing siezed and is welded to the spindle and he/we are worried about galling if he tries to force the old bearing off, so are looking at a spindke swap.

Having never done it I hit Bentley and found NADA-haven't got a Haynes, Chilton is only useful as a table shim. Does the casting at the bottom of the strut come off and permit pressing out the spindle? We have access to a donor but want to know if its a strut swap of a simple unbolt and swap of the lower casting?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front spindle replacement [200]
posted by  stoney subscriber  on Sat Nov 5 08:52 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.