Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2021 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

vacuum side of FPR 700 1985

posted by  MarkyMark on  Sun Nov 27 09:36 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 17 21:34 CST 2012
[RELATED]

1985 740 GLE manual trans m-46 od

i have signigcant loss of power and chugging underload and idle is around 1000 rpm.

I have read about fuel smell on vacuum side of FPR and am wondering if the thin hose towards the front of the car at the fuel rail is the vacumm side.
When I take off the thin hose on the FPR ...idle surges. Is that good?

Also what troubleshooting meathods would you recommend? I checked to make sure all ignition wires were on tight and will pull the plugs and have a look see.

I pulled off the AMM connection ( ingnition off) and started car. it still idled although not well.

I took off the hose from IAC valve towards the air intake and car died. Is that good?

I've screwed in and out the mixture screw Black round plastic thing and didn't notice to much of a difference.

Please help

Not looking to throw wads of cash at this.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New vacuum side of FPR [700][1985]
posted by  MarkyMark  on Sun Nov 27 09:36 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.