Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

92 960 Block Questions 900 1992

Hello Bricksters,

About a year ago with 170K on the clock, the head gasket blew on my 92 960. Because there was no way I was able to afford fixing it and it was far too complex for my meager skills, I gave the car to my friend Rich, the master mechanic in exchange for some time helping me with my 240's.

Well, about a year went by before Rich decided to tackle the head gasket and in the interim, the block cracked just below the exhaust manifold. I haven't seen it but he claims it is repairable and on Friday he has a master welder coming over to hopefully weld up the crack. Rich doesn't have internet service so I am his go-between for answers.

Two questions have arisen. First has anyone had any experience with this, so I can relay any important info on to him. Second, the welder wants to know exactly what the block composition is, so he will be prepared to use the proper welding rods. He believes (but is not sure) that the block is 53 Series Aluminum Alloy.

I hope that this makes sense to someone who may be able to provide some answers. Thanks very much in advance for sharing your knowlege.

Marty Wolfson
--
93 244 185K, 93 244 112K, 93 245 116K (in California now), 99 V-70 89K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 92 960 Block Questions [900][1992]
posted by  Oleseahorse subscriber  on Wed Nov 30 10:40 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.