Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Conversion of 240 91 auto trans. to M-46 with hyrraulic clutch, feasible? 200 1991

posted by  Rolandp on  Mon Dec 5 07:24 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 15 17:36 CST 2014
[RELATED]



I would like to convert a 240 1991 with automatic transmission to
manual transmission M-46 I can get from a 740 1990. The 740 has the hydraulic
clutch system using brake fluid from the brake reservoir. I would also recover the ring gear/pressure plate and clutch bearing from the 740.

Can I install the 740 pedal system or will I need to stick with the 240 cable clutch system.

I figure also that I will need parts to connect the M-46 to a 240 driving shaft but I don't know what yet.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Conversion of 240 91 auto trans. to M-46 with hyrraulic clutch, feasible? [200][1991]
posted by  Rolandp  on Mon Dec 5 07:24 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.