Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing rear end ratio, LSD too? 900

posted by  760Jared on  Thu Jan 26 14:20 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My '95 960 has a built Ford AODE behind a 5.0, and equipped with a wide ratio gearset which makes for too-short gearing when combined with the stock 3:73 rear end. I thinking about either installing a 3.07 or 3.31, as both are readily available used for cheap on Ebay (out of CJs, etc.)
These taller ratio ring and pinions use a different carrier than the 3.73, so does anyone know if the stock Volvo/Eaton ALD will fit in this carrier, or will I have to buy a new unit, such as a True Trac?

Thank you, Jared






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Changing rear end ratio, LSD too? [900]
posted by  760Jared  on Thu Jan 26 14:20 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.