Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any PRV V6 experts? B27 to B28 or B280 200

Hello,

A local Volvo guy has a '80 262C with a bad engine. He wants me to replace the engine. I have absolutely no experience with the PRV engine, but plenty of wrenching experience, mostly on 240's and my 780.
I assume his car has a B27F, and it would be much preferable to put the updated engine in there. Question is, should I look for a B28F or a B280F?
If I understand it correctly, the B27F and B28F used K-Jet, while the B280F used LH-Jet. Generally I'd prefer the newer design, but I am afraid that the B280F might have different sensor holes than the B27F, and I that could grow into a big headache. I have heard different stories on the cam oiling issue, some say it was solved with the B28F, others that it was only solved with the B280F.
So I have two questions:
- Is the B280F much better than the B28F, and worth considering?
- If it is worth considering, are there any issues with having different sensors?
Any other words of wisdom always appreciated!
Cheers,

Balu
http://www.geocities.com/balu_vandor/mycars.html






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Any PRV V6 experts? B27 to B28 or B280 [200]
posted by  balu subscriber  on Wed Mar 8 17:37 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.