Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Ignition woes/ questions..... 900 1994

posted by  Chuck Jaxel on  Thu Mar 16 06:29 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 11 15:58 CST 2014
[RELATED]

Hello all,
Its me again, still battling with my 1994 940 Turbo wagon. It now will not start at all. No firing at the plugs. No codes set in the ignition ECU. Replaced the power stage, still no spark, but its dumping fuel. Need to know some things. Where does the RPM sensor send its pulses? Can these be checked with a DVOM? Are they resistance or a small voltage? What other sensors/relays feed information to the ignition ECU. I have 12 volts at the coil. I have 12 volts at the power stage. I need a helper to crank the engine to look for the varying 2 volts at the power stage plug. + side of coil should also pulse? At this point I'm thinking of substituting my 1990 ignition ECU into the 940, will this work, or make things worse?? What does the black box on the firewall do? Its mounted right in the center with a ground strap on it...Any help would be greatly appreciated.
Thanks...
Chuck Jaxel
--
Chuck Jaxel, Pine Hill NJ, Near Philly...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ignition woes/ questions..... [900][1994]
posted by  Chuck Jaxel subscriber  on Thu Mar 16 06:29 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.