Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'92 240 (w/ manual tranny) stalls when coming to stop and shifting from 2nd to 1st 200 1992

Fuse #6 burned out today, so I cleaned the contacts, applied just a dab of conductive paste, and installed a new 16A fuse. The car started up immediately, and as I drove down the street, and shifted down to come to a stop, as the car was fully stopped, it stalled. I turned the car off, turned it back on, and as I continued to start and stop, it did not again stall. Any help would be greatly appreciated-Thanks! :)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '92 240 (w/ manual tranny) stalls when coming to stop and shifting from 2nd to 1st [200][1992]
posted by  1sciroccofahrer  on Sun Apr 9 13:14 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.