Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

windshield rust repair 200 1988

posted by  michelg on  Wed Apr 19 17:12 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Nov 23 05:14 CST 2007
[RELATED]

I'm in the process of repairing significant rust damage at the lower edge of the windshield frame. As in, about 6" of the pinch weld was missing (rusted away) on the passenger side :-(.

Things are mostly intact now, with a combination of POR15 and epoxy/fiberglass.

What I'm wondering is: how tight is the tolerance of the install surface for the windshield? I'm planning on having a 93 (new-style) windshield installed, instead of the old-style with frame that I removed.

The surface is pretty close to the thickness it's supposed to be, but does it have to be *exact*? Does anyone know what kind of tolerance the 93 windshield seal can deal with?

Thanks!

Michel

1979 242DL
1988 244DL





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New windshield rust repair [200][1988]
posted by  michelg  on Wed Apr 19 17:12 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.