Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

multiple codes on 960 tranny 900

Hi,
I knew I was getting tranny problems when I bought his car a week ago, but not a mystery like this. The previous owner had changed the PNP switch, and so did I. I am still getting the 313 code, along with 223, 232, 222 and 131. (That is two solenoids plus missing signals from the throttle and speedo. ) I thought I found the problem -- the blue/black wire had broken away from the PNP connector on the car side. (It is the black wire on the switch side of the connector.) I jumped the oonnector using a short lead and solder connections. No go. I attacked the connectors with spray contact cleaner. Still no go. I cleaned up the battery ground terminal. Nothing. There's a buzzing under there that sounds like a electrical component on the fritz. A vibrating solenoid?
Any thoughts?
Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New multiple codes on 960 tranny [900]
posted by  someone claiming to be Todd  on Sun Apr 23 12:33 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.