Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to remove oil pan 200 1985

posted by  inline Four on  Tue May 2 09:38 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

And to make it worse this is at the junkyard where the car sits as is and no hydraulic jacks allowed. So far I've removed all the oil pan bolts, removed sway bar bushings, and unbolted the 4 bolts and u-bolt for the steering rack. Oh I also unbolted the lower bolt for the passenger side engine mount. The pan wiggles around but just not enough room for it to clear the flywheel/bellhousing. Any tips!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to remove oil pan [200][1985]
posted by  inline Four  on Tue May 2 09:38 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.