Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

brake bleeding 200

posted by  someone claiming to be alan on  Wed May 10 17:45 CST 2006 [RELATED]

1984 240 Wagon
Just replaced the front calipers,( Girling ) and am now having a hard time bleeding the system. The bleeder line seems clear of all air, but the pedal still goes all the way to the floor. I notice that the rebuilt calipers came with 2 copper washers. I assume these go between the brake fluid lines and the caliper, but as the old calipers didn't have these washers, I didn't install them. I thought the seal was formed by the "cone and cup" design of the brake line connection to the caliper. Am I wrong here, is the copper washer necessary? Checked all the previous threads, but couldn't find anything related.
Thanks for any help






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New brake bleeding [200]
posted by  someone claiming to be alan  on Wed May 10 17:45 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.