Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 auto trans leaking at 90 deg fittings before cooler lines 200 1992

posted by  Herb Goltz on  Mon May 15 03:45 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:23 CST 2014
[RELATED]

Hello All:

I was under my 240 last night installing a new O2 sensor and noticed that my tranny was leaking, apparently at the joint between the transmission and the 90 deg couplers that the tranny cooler lines attach to. Strangely, both are leaking (fittings for both the in and out lines).

What kind of seals are between the couplers and the tranny? It looks like you would need to get the angle of the coupler right in order to reconnect the lines. If there are tricks/gotchas for this job, let me know-- it is making a mess in my driveway so I need to fix this soon.

Thanks!


--
Herb Goltz, Aurora, Ontario, Canada '92 245 w/130K mi, '92 945T w/200K mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 auto trans leaking at 90 deg fittings before cooler lines [200][1992]
posted by  Herb Goltz  on Mon May 15 03:45 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.