Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1983 Underdash wiring melted and plugs and relays deformed from heat 200 1983

Hi fellas. My long term project for my soon to be 16 year old daughter has taken a reversal. After replacing the "environmentally friendly" but rotten wiring under the hood of this '83 245GL I found problems under the dash with several wires coming from the bulb failure relay and from the headlight switch literally melted together with other neighboring wires. I took the dash out. Whoa nellie, I wish I could do that over with a digital camera and lots of labels. The failure relay was melted and deformed as was the connector plug for the headlight switch and the wires from it. Is this normal and where can I find a good connector? Every junker I have found either was missing the connector or it too was melted and deformed. Can I splice other wires after separating and removing the melted wires? What likely caused all this?? All help, pictures, and leads would be appreciated. IS THERE ANYONE WHO ACTUALLY SELLS THESE CONNECTORS AND WIRING???






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1983 Underdash wiring melted and plugs and relays deformed from heat [200][1983]
posted by  jgreenwood subscriber  on Mon Jun 5 17:54 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.