Hello.
car is... 1979 245dl with a b21f and m46
Today in the hopes of fixing a non runing car i removed the ignition switch plug and removed the back plate..I took a digital picture in the event of the wires springing out. but the digital pic did not save and the wires did spring out so i have no idea how to reasamble the switch.. Anyone can help with either pics or otherwise?.
turned out that the problem was not in the switch and we managed to continue to drive with red and yellow connected and blue to start. but no accessories at all.

any help would be greatly apreciated.

ps. This is the volvo that is driving from d.c. to argentina..we are in peru. where we broke down at a police check point. the problem turned out to be a poor repair to a wire coming from the sensor on the dist. going to the computer thingy on the fender passenger side.

Thank you
all the best.