Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Head bolt torque 900 1993

posted by  JPerkinson on  Mon Jun 19 23:15 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Gents-

Quick question: The Service manual reads the following (re: head bolt torque)

"Tighten bolts in three stages as follows:
1. To 20 Nm (15 ft.lb)
2. To 60 Nm (44 ft.lb)
3. Through 130 degrees"


I understand: do all of them to 20 and then all to 60 Nm... But does the last step mean i'm supposed to push them each 130 degrees further after?

Maybe this is a silly question... I just want to be sure and don't feel like trying it out and stripping a head bolt.

Thanks
-Jim P.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Head bolt torque [900][1993]
posted by  JPerkinson  on Mon Jun 19 23:15 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.