I've posted this before, and didn't get any responses. I am getting close to the "Moment of truth" here, so I figured I'd ask again and see if there are any fresh experiences. I am going to swap the entire front strut assembly from a '92 into my '87. The '92 assemblies including the hubs have only 75K on them and my 87 is about to hit 200K so newer springs, bearings and all would be the benefit. Also I think the work will be easier; just take one out, put the other in, right? The stumbling block here is that the '92 has ABS, and the '87, of course does not. My big question is, will it be a bolt in operation or will I have to modify things. Has anyone out there done this yet? Thanks for the help.