Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

a lot of crank case pressure? big problem? 900

posted by  xluke on  Fri Jun 30 11:54 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jan 16 15:48 CST 2009
[RELATED]

Hello,
I cleaned out the crank case ventilation system today (breather box/oil trap all the way up) and found lots of crud and cleaned it all out. I then reassembled the car and did a 'test' i'd never done before. I took off the oil cap with the car running and put my hand over the fill hole and felt a fair amount of pressure. Is that normal? Should there be a noticable amount of pressure immediately after putting your hand on the fill? Also, there was oil splashing aroundn but I presume thats just the cam churning it up.

Its a b230 engine on a '94 940.

Thanks a lot!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New a lot of crank case pressure? big problem? [900]
posted by  xluke  on Fri Jun 30 11:54 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.