Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

accessory guage cluster 200 1987

posted by  JimSig on  Sun Jul 2 04:08 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Mar 28 17:24 CST 2014
[RELATED]

I have a three guage cluster that I found at the jy and am installing in my 87 244. One guage is a 5 bar oil pressure guage. I have two oil pressure sending units that I scavenged at the jy yard too - one was on a car with a 3 bar gauge and the other on the car that my 5 bar gauge came from. Are the sending units the same for both the 3 bar and 5 bar? Also, since my car originally only had the dash light, it only has one wire at the oil pressure sender - what do I need to do to wire in the guage.

The cluster also has a voltmeter which I have wired into the switched power lead going to the radio and is working fine.

The third guage I have is an oil temp gauge. I understand that the sender for this gauge is a replacement for the oil pan plug. Unfortunately, the donor car did not have this in place. Does anyone know of a source?

Thanks!

Jim






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New accessory guage cluster [200][1987]
posted by  JimSig  on Sun Jul 2 04:08 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.