Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Throttle Body right side bolt .......Help !!!!!! 200

posted by  Maxhnb on  Mon Jul 3 06:19 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 18 15:39 CST 2007
[RELATED]

I finally have decided to service the throttle body on my 1988 240DL. Following the procedure , I went to remove the three bolts holding the throttle body to the intake manifold.

The right side bolt, gives no room for a straight in socket, little room for a solid 13mm box or open end and rounding occurs easily on the head. I tried loosening the plastic unit to the right with allen wrench only to get minimal clearance.

Anyone have this problem ? Have a solution ?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Throttle Body right side bolt .......Help !!!!!! [200]
posted by  Maxhnb  on Mon Jul 3 06:19 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.