|
Gents-
I've got a '93 960 wagon with the 2.9L I-6 engine. It has ABS, and the front calipers say 'Girling' on them. I just put new rotors and pads on the rear. That job was pretty easy, as only 2 hex bolts were holding the caliper to the backplate.
On the front, however, I am unsure of how to remove the caliper. There are two hexbolts that look like they are part of some spring compression located more towards the ouside of the caliper, and two hex-socket caps that might be holding the calipers on (they are a little more towards the center of the plate and difficult to see). What should I be removing here?
Thanks
-Jim P.
|