Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removal of flex hose from manifold to air filter box question. 200 1986

posted by  Xraybob on  Fri Jul 21 05:11 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:32 CST 2014
[RELATED]

I just read a post by Sirbog about his brick stalling in hot weather and Smitty suggested removing the flex hot air pipe hose from the exhaust manifold to the air breather box. Sounds like something I might need to do here in hot Florida. Is that all I need to do just disconnect it at both ends or do I cap off the opening to the breather box where the hose attaches? Is there anything I do to the inside of the breather box where the air filter resides?

Thanks.
--
'86 sedan with 343K miles with original engine and automatic transmission






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removal of flex hose from manifold to air filter box question. [200][1986]
posted by  Xraybob  on Fri Jul 21 05:11 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.