I recently had some trouble getting into my car. the Driver door was stuck and the Lock would not operate. I had to get in from the passenger side and anyway exactly how I got the door open I don't remember. But I was left with a perfectly working door and lock and some left over parts. The first part is the extension rod for the lock which has an unnanutral looking ZigZag to it and the second is a little black clip with a whole at one end that i found when i took the door panel off. I have attempted to reassemble it but i can't see what i'm doing and I don't know what it is supposed to look like. the result is a very rough working lock that is difficult to operate both with the key and with the knob. what i need is a schematic of the door lock mechanism so i can go back in and assemble it correctly. I also need to know where i can get new Trim clips.