Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Crankshaft Pulley Guide Pin? 91 240 200 1991

posted by  DHartlein on  Fri Jul 28 11:46 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 2 20:00 CST 2014
[RELATED]

Putting it all back together after doing the water pump, timing belt, seals, drive belts, radiator hoses, etc.....

Just noticed the Bentley shop manual says the crankshaft pulley needs to seated on a guide pin. Am I right in assuming this is the raised spot - 1/16" or so - on the bottom of the crankshaft mount when I am at top dead center? It is 180 degrees opposite the slot that aligns with the timing mark on the timing belt cover.....

Thanks. Should have read ahead!!!!!

David






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crankshaft Pulley Guide Pin? 91 240 [200][1991]
posted by  DHartlein  on Fri Jul 28 11:46 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.