Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2016 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Broken M46 clutch bleeder screw. How to remove the clutch slave cylinder? 700

posted by  Allanwayne on  Sat Jul 29 05:01 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 8 15:05 CST 2012
[RELATED]


As expected, the bleeder screw on the slave cylinder broke off while trying to bleed the clutch. Now I have to drill out the remains of the screw, which is awkward with the slave still attached. I have removed a snap ring on the slave, and given it several whacks to push it forward out of what appears to be its bracket on the transmission, but it won't budge.

Am I missing something, or just not whacking it hard enough?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Broken M46 clutch bleeder screw. How to remove the clutch slave cylinder? [700]
posted by  Allanwayne  on Sat Jul 29 05:01 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.