Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AUTO TRANS. IN PROCESS OF REPAIR - NEED FEEDBACK 200 1980

Hello,

The 1980 244, suffered from slipping 3rd. to 2nd. gear. Some colleagues suggested a stuck overdrive cable, while others saw doomsday for the auto trans.

So. I drained the bottom tray and checked the cable (which is functioning fine) but found out that the recenly replaced trans. oil filter was full of muck.

How can this be, it was even dirtier than when I replaced it 3 months ago, and the car was standing for several months before?

Could this have caused the slippage?

Anyway, now, until any of you advise - the oil tray is empty. Should I drain more oil from elsewhere and refill the whole trans. with fresh oil? Is this possible (I know about the 2 liter at a time as Sven's Maintainer said).

Waiting for your kind reply,

Gadi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AUTO TRANS. IN PROCESS OF REPAIR - NEED FEEDBACK [200][1980]
posted by  abluecar  on Mon Aug 7 08:59 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.