Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'96 960 sedan side windsheild molding needs replacing 900

posted by  NABs on  Fri Aug 11 13:19 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 16 15:32 CST 2008
[RELATED]

HI!

Thanks in advance for reading and posting.

My 960 needs the right and left side windsheild molding replaced. Thankfully, the top molding is in very good condition. When I asked a body shop for an estimate he game me some figure in excess of $300 as the worse case scenerio. Saying "I think there might be clips and if there are we need to remove the top molding and ...we might need to lift up the windsheild, which could break..."
Needless to say, I'd rather do this myself.

The side moldings are seperate pieces from the top molding with a corner piece joining the top with each side.

If anyone could at least tell me where I can find the proper molding that will give me a head start.

any advice is welcomed!!

Thanks again!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '96 960 sedan side windsheild molding needs replacing [900]
posted by  NABs  on Fri Aug 11 13:19 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.