I'm having to put back together an airlfow meter on a CIS-equiped 244 that I recently bought. The previous owner took it completely apart thinking it should be cleaned. In the process, he removed the screw that adjusts the mixture. Anyway, Acording to the Volvo greenbook, the 3mm screw should be turned until fuel "begins to flow from an open port on the fuel distributor" and then turned back counter-clockwise 1/2 turn. These are the instructions for replacing the part with another one.

Does this mean that fuel should just become visable in the open port, or should it be flowing out? I know I will have to fine tune the CO once I get it running, but for now, I just want to get it started.

I tried turing the 3mm screw until fuel just appears, but I've still got a no start. The injectors spray when the flap is manually raised and the pumps are on, so I know I'm getting fuel, just not the right amount.

Any ideas?