Ok so after much work i though the old 89 240 was ready to roll, changed cap, rotor, plugs, wires, coolant temp sensor, and checked all fuel lines, vacuum lines, and air passages. I have good fuel pressure and perfect spark. But the car will not start...stiiiiiiiilllll. I am just about ready to push it in a lake. Next step will be to replace the crank position sensor. The symptons are that the car cranks over fine, has fuel and spark, but no life. It doesn't even seem to try to fire. amm is good, fuel relay is good. pumps work, all fuses including the 25amp under the hood have been cleaned or replaced. I am at a loss right now. I even have two ecu's for the car and neither seems to make a difference. Please help, my poor wagon needs some tlc since it has been driven daily for 8 months since the sedan decided to stop working. I can't leave it sitting anyomre