Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2000 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing head gasket 700 1990

posted by  tk74du on  Sat Aug 26 09:20 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 11 04:30 CST 2010
[RELATED]

on my dead turbo brick. Leaving now to buy PB Penetrating Catalyst to soak the exhaust manifold nuts over the comming week per "Procedural Tips and Ideas. [Chris Herbst] " under "Engine: Mechanical". I've read everything I could find on the board and the FAQ regarding the head gasket replacement. I'd appreciate any useful input any of you can offer while I wait for the manifold nuts to let go. I tell you what, I hope everyone out there appreciates the "most excellent" info. on this board. It's just the best I've seen so far.

Thanks
Tony Knight






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing head gasket [700][1990]
posted by  tk74du  on Sat Aug 26 09:20 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.