Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need help in CT with auto trans output flange 200 1987

posted by  missa on  Sat Sep 2 05:26 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 22 20:32 CST 2008
[RELATED]

I am at a friends garage in new haven ct with my 87 240 wagon and am in the middle of replacing the auto transmission tailshaft output shaft seal and have a problem.

The surface of the output flange that the driveshaft connects to is too worn. I need the output flange and don't know where to find one here in CT. If someone from this area can help me find one of these I'd appreciate it.

There is just too much play with the existing worn output flange..I'd hate to have to do this whole job over once i get back home.

I've called all shops listed on the site and nobody is open, and no junkyards have anything for me.

Any suggestions on where i could find this in the area would be great, and i'll check back often.

thanks
--
1978 242 285k / 1987 240 wagon 140k / 1990 240 sedan 110k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need help in CT with auto trans output flange [200][1987]
posted by  missa  on Sat Sep 2 05:26 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.