Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2012 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Gas gauge test black to brown or grey/white 700

HI..does it make a difference which wire you use with the resistor ..the black brown or black to grey/white? The books I read say it should read 3/4 since 68Ohms is position 4 which is 3/4 tank. The link on here says it should read
1/4 tank...thanks...Jeffrey






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Gas gauge test black to brown or grey/white [700]
posted by  someone claiming to be Jeffrey  on Sat Sep 9 11:22 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.