Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2008 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PCV 120-130

uid 38537's pic
posted by  122s nut on  Fri Sep 15 01:40 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Feb 6 18:58 CST 2013
[RELATED]

(I feel dumb asking) Can anyone tell me how to remove (to clean) the box under the PVC valve. I have pryed a little tapped a little, but I am afraid to pry too hard as I have no spare for it. Any tips? Also I am getting a lot of mist from the tailpipe on a cold startup mixed with a little oil. Rich carbs? It doesn't smoke and runs great when warm, but is totally inconsistant when I start it. Once it runs good then next time misses so bad that the car rocks. Ok--- so it turned out to be several questions. I am alone in a small community without 122s peers. Any advice would be appreciated.
--
Don www.twocreativeforge.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PCV [120-130]
posted by  122s nut  on Fri Sep 15 01:40 CST 2006 >
  • New PCV [120-130]
    posted by  walrus3 subscriber  on Fri Sep 15 01:49 CST 2006 >
    • New PCV [120-130]
      posted by  122s nut  on Fri Sep 15 01:56 CST 2006 >
      • New PCV [120-130]
        posted by  walrus3 subscriber  on Fri Sep 15 03:37 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.