Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stub stacks for SUs 140-160

posted by  Hagar on  Thu Oct 19 10:54 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:42 CST 2008
[RELATED]

I recently bought a pair of K&N stub stacks on eBay - with the plan of putting them inside the standard airbox of the 144 then putting a pod-type filter behind the grille.

They were advertised as having an opening of 44mm (=1.75", near enough), so I figured they would fit my HS6 carbs .... but it turns out that the throat on the inlet side of the HS6 is only 40mm diameter, although on the manifold side it is 44mm.

My bad - should have measured first (bolt spacing is also slightly wrong)

Anyway - I am wondering what they fit - HS8 2" carbs perhaps ? Rhys ??

I am going to re-sell them, but would like to describe accurately what they fit.

(If anyone wants them, they can have them for what they cost me ... AUD$25 + postage at cost)

Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stub stacks for SUs [140-160]
posted by  Hagar  on Thu Oct 19 10:54 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.