Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

front end vibration at speed. 900 1993

posted by  ajs on  Wed Nov 22 11:43 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 1 11:32 CST 2014
[RELATED]

The front end of my 940T wagon (197k kilometers)was making clunking noises when going over speed bumps however the car was fine at even 140kph.
I replaced the 4 conical bushings a week or so ago(which were shot by the way)with some from fcp groton; the other bushings were good. The repair went well.
Yesterday when at 110 kph on the 401 and turning to change lanes I got quite a wobble from the front end (just for a second or two during the lane change); Going straight no problem- I drove carefully home and inspected the work I had done. The bolts were not loose (as I had expected) the wheel nuts were good too. There was a bit of play in the ball joints and also the tie rods (not much) and I plan to replace these items soon.
Have any brickboard members had any similar problems and any suggestions.
thank you
andrew, toronto, canada
--
1993 940T wagon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New front end vibration at speed. [900][1993]
posted by  ajs  on Wed Nov 22 11:43 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.