Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2014 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ID Plate under hood vs brakes 700 1986

The key in the FAQ has worked well for my later 740s (1990, 1991), but my "new" 1986 seems to use a different code format on a similar plate. Can someone help me interpret the earlier version?

The FAQ says:

Refer to the product plate (located above passenger front headlight or in the trunk or door jamb). Go to position "E" (end of the second line on the right). The following codes apply:
2: Girling Front, ATE Rear
3: DBA/Bendix Front, ATE Rear
4: Girling Front and rear
5: DBA/Bendix Front, Girling Rear


And my 1986 plate looks like:

Photobucket - Video and Image Hosting

I don't have a brake problem, or even a reason to pull the wheels, but I'd like to know what kind of calipers I have so I can get parts before jacking the car up if I do have an issue. Interpretations of any of the other codes on this version are welcome as well. Thanks in advance.



--
Andy in St. Paul - '91 745 227K mi, '91 745 210K, '90 744 194K, all Rex-Regina; '86 745 GLE M46 230K; past 240s






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ID Plate under hood vs brakes [700][1986]
posted by  interstition  on Tue Dec 5 03:26 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.