Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tool For Intank Pump Removal 200

posted by  dobber13 on  Wed Dec 6 10:42 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 19:10 CST 2014
[RELATED]

Last time I removed the intank fuel pump I had a hard time getting the ring lose using a long screwdriver and a hammer(not a smart way) to unlock it.I had to do it agian today but found a tool that I use alot at my job.It's a garbage disposal rench.Thay cost about $8.00.It has a T handle 9 inches long and a U shape end 4 inches wide.Worked great and with a little grease on the new O ring when locking it in.Thought I would pass it on since the tool can be bought at most hardware stores.And if your garbage disposal is jammed thats the tool for the job.One tool 2 jobs. Charlie






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Tool For Intank Pump Removal [200]
posted by  dobber13 subscriber  on Wed Dec 6 10:42 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.