Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

another H4 wiring question 200

Hi,

This is a follow up to my post on the same subject earlier this week. I'm in the process of wiring the headlights (Euro) so they're powered by the battery with relays. I bought the kit to do this from Dan Stern.
I have a good understand of how the relays work, but I'm still confused about the 9004 male adapters that come with the kit. The plug has three leads. I assume one for high beams, one for low, and the last for the ground. Do I run three wires from each 9004 male adapter to the inputs on the relays? For instance, one to the high beam relay, one to the low beam relay, then one to a ground? If so, where exactly would I ground it?

Also, on the 9004 plugs, how do I distinguish the low/high leads?

Thanks!
--
crazy driving: Cincinnati, OH, 1993 244 Limited Ed. 'Classic' model (daily driver). 65,xxx k. Mods: ipd sway bars, strut to firewall braces, Bosch amber fog lights, 52mm tach.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New another H4 wiring question [200]
posted by  crazy driving subscriber  on Sat Dec 9 09:10 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.