Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Current wisdom on suspension bushing choices... 200

posted by  Five Bricks on  Mon Dec 11 11:12 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 22 15:09 CST 2007
[RELATED]

We have an '89 244 that needs a lot of front suspension work. The front tires are exhibiting abnormal wear on the outer edge of the tread. Upon inspection, it looked like the front control arm bushings are shot.

To be honest, the "aftermarket" brand description listed under so many of the FCP Groton and eEuroparts suspension componnents scares me. I had a bad experience with a set of no-name torque arm bushings and dont want to repeat it.

I am comfortable with the Boge rear lower control arm bushing listed by FCPG. However, there are no Boge front bushings listed anywhere I can find. Will I need to go to the (gulp) dealer?

Also, I haven't been able to bring myself to try urethane bushings yet. Has anybody had any experience with the Super Pro urethane lower control arm bushing kit (SPF637K, $29.00)?

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Current wisdom on suspension bushing choices... [200]
posted by  Five Bricks  on Mon Dec 11 11:12 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.