|
I have a VDO Volvo 52mm Tach from a 240 series car that I would like to install, since this is a used instrument I have no wiring to go along with it. there are 4 spade (.25) terminals on the back, 3 horizontal ones that look to go into the instrument proper and one at about a 45 degree angle relative to the 3 grouped terminals. Also a light bulb holder that has a snipped off wire.
Viewed from the back it looks a bit like this(with the O being the bulb):
............../ O
............... -
.............. - -
Has anyone installed one of these beasties and know what goes where?
TIA
OK
|