|
I was underneath my '92 945T doing ball joints and dealing with parking brake hassles (after less than a year-- dealer parts too). The dust shields behind each rotor are really rusty-- on the driver's side front the shield is almost completely gone!
That's life in the rust belt! Has anyone found a good source for these shields online (or otherwise)? I'm going to need all 4. Given the sorry state of the bolts on the keeper springs for the parking brake, this has the potential to be a challenging job-- I had to remove the rusty and stripping bolts with a Craftsman extractor and a 22mm wrench...
When I do the rears, what are the chances of pulling the axle shaft without ruining the seals, or is that going to be part of the job too?
Thanks!
|