Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'92 240 and replacing fuse #6 with a blade fuse.................... 200

posted by  1sciroccofahrer on  Wed Dec 20 02:43 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Mar 8 19:17 CST 2014
[RELATED]

Having had fuse #6 blow out every three months, or so, my friend and I have decided to go with a blade fuse and see if the issue is (or was) bad contact with the ceramic fuse. We have the wiring, and proper connectors, but have run into a little problem: blades fuses don't come in 16amp, but rather 15amp. My question is : Is it o.k. to use a 15amp, or do I need to use a 20amp? I am thinking 15amp would be better, but would appreciate feedback. Thank you ever so much, and have a most wonderful Wednesday :)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '92 240 and replacing fuse #6 with a blade fuse.................... [200]
posted by  1sciroccofahrer  on Wed Dec 20 02:43 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.