i replaced my leaking steering rack. (i replaced my old-style 1986 reservoir with the later model reservoir & pump years back).

i put the banjo bolts on from the hoses, and i noticed there were only one per hose, and i had a spare sealing ring from the larger bolt.

i didn't see a smaller one. i was thinking it may have fallen out from the rebuit rack.

so i'm not sure about this.

questions:
1) does the banjo bolts have 2 sealing washers each or 1?
2) if just 1 each, should the washer be between the bolt and the hose connection or between the hose connection and rack?

thanks again,
byron golden
86 245
92 245