Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Question with wires on a heater core replacement?? 200 1991

posted by  Oliver240 on  Mon Jan 8 09:02 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jun 16 20:00 CST 2012
[RELATED]

I've been working on removing the heater core unit from my mom's 91 240 station wagon. I've managed to get all the mountings/dash supports removed. Most of all the vacum tubes, and the left and right vent system. I'm right about to disconnect the heater core hoses and pry out the ac core. I just noticed however that the wires coming out of the heater unit,( right in the center, if your facing it), that go to the fan speed switch, also go to other places.
Now I've seen some pictures on the cleanflametrap.com sight where it looks like his wires just come out to the the fan switch and stop, mine however come out of the heater unit, go to the fan switch female plug and go elsewhere (from the female connector)... I know this might sound a bit confusing.. but will I have to clip and reconnect these "extra" wires or am I missing something??
Thanks for your help
cp

p.s.
Also do those that little bubble vacum unit on the bottom of the heater unit come out with the whole thing? I think they do but...
thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Question with wires on a heater core replacement?? [200][1991]
posted by  Oliver240  on Mon Jan 8 09:02 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.