Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any advice for exhaust removal/reinstall 200

posted by  OnlyWagons on  Fri Feb 9 02:16 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jan 21 00:40 CST 2009
[RELATED]

I'm planning on doing a full exhaust swap from one 245 (with a two-month old system) to another (with an ancient system). The cars are identical ('83 turbos), and I plan to replace everything from the turbo back.

Can I drop the whole assembly as one piece. It seems like there are just a couple of rubber hangers at the rear, and one at the front by the cat. I remove those, then unbolt the cat pipe from the turbo and it should all drop out, right?

I'm hoping to avoid disconnecting anything to avoid as many rusted/corroded bolts and clamps as possible.

thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Any advice for exhaust removal/reinstall [200]
posted by  OnlyWagons  on Fri Feb 9 02:16 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.