Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Broken fuel line into fuel filter banjo fitting (244) 200 1982

posted by  Joey 13 on  Sat Feb 17 11:50 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 15 21:30 CST 2007
[RELATED]

Got a little too "motivated" to pull off the fuel filter during a change and broke the fuel line into the fuel filter banjo fitting.

All fittings into the filter are intact. But the fuel line end, more specifically the flared edge of the fuel line that sits inside the conical screw-on section of the banjo fitting, fatigued and snapped.

Question: is there an inexpensive fix to repair the broken end with a replacement nylon or metal piece that will fit over the fuel line and under/into that conical screw-on part of the banjo fitting?

Like this? Or something similar?
http://www.partsamerica.com/ProductDetail.aspx?categorycode=3120D&mfrcode=DOR&mfrpartnumber=800050

Sorry about the extensive verbage- rather be too specific than not enough (particularly when I don't know what to call some parts)!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Broken fuel line into fuel filter banjo fitting (244) [200][1982]
posted by  Joey 13  on Sat Feb 17 11:50 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.