Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Connecting to the battery junction box, '93 horn upgrade - Ken C? 200 1993

posted by  scorron on  Mon Feb 26 06:20 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 7 21:10 CST 2014
[RELATED]

I'm upgrading the weiner horn in my '93 to the old two-horn style. I've got a Bosch relay, using the horn pad circuit to power the coil and flip the relay to supply full battery voltage to the horns with 10ga stranded wire.

The only part of the puzzle I have left is the best way to connect the hot line to the battery. I'd like to connect it at the junction box beside the battery, under the 30amp fuse, but have NO idea how. I don't see a way to open up the box, and have no idea how the wires are attached inside. Any ideas? I'd like it to look professional and clean rather than have ugly splices all over the place so a wire running out the junction box would be ideal.

Ken C, I know you've done this a few times, what can you tell me? Anyone else know how the '93 junction box is set up? Guess I'll go outside again and carefully toy with it until someone posts.

Thanks guys!
--
Sean - now frolicking in the Land of a Thousand 240's (aka, Fredericksburg) thrice a week.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Connecting to the battery junction box, '93 horn upgrade - Ken C? [200][1993]
posted by  scorron subscriber  on Mon Feb 26 06:20 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.