Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

It's true- not all Volvos can accept grease fittings on the universal joints

posted by  rstarkie on  Mon Mar 5 09:19 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

Some time ago there was a thread about being able to install grease fittings on the universal joints.

I had not run into any that wouldn't accept the fittings but my experience is limited.

Today I was set to install them on a 1992 944Ti and was surprised to find that there were no alan screws to remove in order to install the 1/4 28 fittings.

I am wondering now if they stopped using the type of universal joints on the 200's that will accept fittings at the same time (1992).

Anyone been able to put grease fittings on the univeral joints of any 1992 model or later?

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New It's true- not all Volvos can accept grease fittings on the universal joints
posted by  rstarkie subscriber  on Mon Mar 5 09:19 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.