Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'95 960 Big Control Arm Bushings pressed in from which direction? 900

posted by  daidnik on  Sun Mar 18 14:26 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 20 22:02 CST 2011
[RELATED]

Which direction are the large front control arm bushings pressed in from?

These are the ~3 inch diameter bushings that have the little ear that gets aligned with an arrow on the top side of the control arm.

I believe that this control arm design went all the way up thru the S90 series.

Vadis makes it look like they go in from the top, but the ones that are there have been pressed in from the bottom.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '95 960 Big Control Arm Bushings pressed in from which direction? [900]
posted by  daidnik subscriber  on Sun Mar 18 14:26 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.